Many people ask how to paint cabinet doors. They want to change the look of their kitchen by replacing their cabinets, but they don’t want to spend much money doing it. In some cases, people can purchase cabinet doors that are already painted. If you have cabinets that are in god shape, and they just need a little bit of a refresh, then you might want to consider repainting them.
Remove Items: The first step is to remove all the items from the cabinets that you don’t use on a regular basis. When you remove these items, you will be left with the frame and the doors. There should be no sticky residue left on the cabinets that you just want to paint over. Once you’re done cleaning the cabinets, you’ll be ready to paint.
Paint: One thing to remember when painting cabinet doors is to make sure that you get the right type of paint. It’s important that the paint you choose is specifically for the door that you’re repainting. If you use the wrong type of paint, your new door could turn out looking funny. If you can’t find the correct paint, then you might want to go ahead and just replace the whole door.
Primer: Before you start painting, you should make sure that you have primed the paint. Primer helps to protect the paint from becoming dull or streaky. If you haven’t primed the paint cabinet doors, then you should lightly sand the doors so that they’ll be smooth to the touch. This should be done about an inch down from the top of the door, and you should do this all the way around.
Gaps: The next step in painting cabinet doors is to fill in any gaps in the design. With unfinished cabinets, this is quite easy to do. Just use some paint and fill in any gaps in the design with a primer coat. Be careful when you’re doing this to keep from marring the rest of the paint.
Remove Old Paint: When it comes to painted doors that are already installed, you have a couple of choices. You can either sand the existing paint to bare metal before you paint it, or you can go ahead and just cover the exposed wood with primer. To remove the old paint from the inside of the cabinet door, you will want to take some fine-grit sandpaper and lightly sand the area. This will help to get rid of any old paint and ensure that the new paint will stick. With the sandpaper, you will also want to make sure that you do not nick any of the trim around the edges of the cabinet door because it will not look right if it is peeling from the middle. Once the sanding has been done, you should then prime the painted door. This will help the paint stay on longer and will make the entire door look its best.
Clean: Next, clean the surface of the doors with mild soap and warm water. Be careful to not wash it too hard because you might end up leaving streaks that will show up later. Also, you can use a special cleaner for wood surfaces that you would not use on other types of materials. Let it sit overnight, and then rinse it out with warm water. You may choose to paint again if you like, but this time you should wait to let the soap soak into the wood.
First Coat: Once you have cleaned the surfaces thoroughly, you can begin to paint the cabinets. Make sure that you only use a small amount of paint on the doors so that you can see how it will look once you’ve covered it with a coat of paint. If you have any leftover after you’ve finished washing it, you can always scrape it off and use it on other projects around the house. It’s important that you only use one coat on the doors so that it will be easier to see what you’re doing.
Brush and Paint: Now you need to know a little bit about painting. Painting cabinets can be a tricky business. Make sure that you’re using the right brushes and paint, and also make sure that the room is well ventilated. That’s because a lot of times you’ll need to clean up any excess paint that may get on things, and you don’t want to risk having your home smell funny. It’s generally not a good idea to open up the cabinet doors when painting, especially if there are intricate designs on them.
Dry: Once you’ve painted your cabinet doors, you might want to allow them to dry for a few days. This will give the paint a chance to dry and you won’t have any mold or mildew build-up. Once they’re dry, you can then reapply the paint if you need to. If you’re looking for information on how to paint cabinet doors, you can usually find tips and tricks in any number of books or on the Internet. And as long as you follow the tips that were mentioned above, you should have no problem getting the results that you want.
When it comes to painting doors, remember that you must start at the base of the cabinet and work your way up. Use the same application techniques that you would when you paint a door and be sure to allow adequate drying time between coats. You don’t want to have to paint rubbers on your hands if you open up your cabinet door to apply it! Follow all the same paint tips from before except that you add a single strip of thin paint to the inside of your cabinet door in place of the full-auto paint.
The reason that you have to add the extra strip of paint is so that it will cover the entire door if you were to try to paint the entire door at once. Another thing to keep in mind is that if you do decide to use auto paint to cover your cabinet doors, you should always use a primer first. The primer will prevent the paint from chipping and peeling off. At the same time, it will prevent the paint from flaking up. Other than that, you’re all set to go.